| The Electric Industrial Batch Oven Series is the cost-effective choice
for startup companies and companies requiring batch oven processing of
parts. The 4-6-6 through 6-6-12 Batch Ovens
features double doors as standard with 3" of high density thermofiber
insulation and rapidly reaches a maximum
operating temperature of 500 F. All Electric Batch Ovens are completely wired and tested. Take
a few minutes and compare the engineering, quality of materials and
workmanship to that of other brands. We
think you will appreciate the difference. |
|
|
| |
|
|
|
| |
| The Model 4W-6H-4D, 4W-6H-8D and 4W-6H-12D Electric Industrial Batch Oven Series features double doors as standard with 3" of high density thermofiber
insulation. Each 4 foot deep module is rated at an efficient 15 kW with total heat output at 15, 30 and 45 kW, respectively. Optional higher kW is available. Maximum
operating temperature is 500 F. The Model 4W-6H-4D, 4W-6H-8D and 4W-6H-12D Batch Oven is completely wired and tested. |
| |
|
|
|
Model 4W-6H-8D ID Electric Batch Oven
Expandable up to 12 feet
|
|
Model 4W-6H-4D ID Electric Batch Oven
Fully assembled with steel floor |
|
| |
| |
EXAMPLE: 4W-6H-8D ELECTRIC Batch Oven
Dimensions
Standard Model
• Internal (ID): 48” W x 48” D x 72” H
• External (OD): 59” W x 55” D x 95” H
Low
Profile Model (specify at time of order)
• Internal (ID): 48” W x 48” D x 72” H
• External (OD): 74” W x 58” D x 78” H
Doors
• Slam latches
• Double doors to reduce door swing
Heating
System
•30kW total (45kW and 60kW options)
• Seamless Tubular elements
• Controlled by Solid state relay
Electrical
•230/3/60 or 230/1/60 (430/3/60 optional)
• High limit for safety
|
|
Exterior
• Painted steel
Interior
• Aluminized Steel
• Steel
plate floor
Circulation
System
• 4,800 cfm total
• Direct drive motor (TEFC)
• Horizontal Airflow
Control
Panel
• Main power switch
• Heat on/off switch
• Single setpoint temperature controller
• Process timer to shut heat off at end of cycle
Options
• Racks and carts
• Disconnect box
• Extension box
•
Pass through configuration (doors on both ends) |
|
| |
Need more
room? No problem! Add a 4 foot deep expansion module with
integral 15kW HEAT and horizontal
air flow to your batch oven for a total of 8 or 12 feet. Don't expand your oven
with an unheated expansion module. Save time, save money,
with a heated expansion module.
Consider
this: Doubling the batch oven volume without
adding an additional heating element will require double the
time to reach the target temperature. Don't
lose hours of valuable daily production time with unheated
expansion modules, waiting while your oven attempts to reach
the target temperature. You
can expand your existing 4 foot deep batch oven to 8 or 12 foot deep without
sacrificing performance. Simply add a 4 foot deep Expansion
Module with integral 15 kW HEAT and horizontal air flow. |
| |
| |
| 6W-6H-4D, 6W-6H-8D and 6W-6H-12D ELECTRIC INDUSTRIAL BATCH OVENS |
| |
| The Model 6W-6H-4D, 6W-6H-8D and 6W-6H-12D Electric Industrial Batch Series features double doors as standard with 3" of high density thermofiber
insulation. Each 4 foot deep module is rated at an efficient 15 kW with total heat output at 15, 30 and 45 kW, respectively. Optional higher kW is available. Maximum
operating temperature is 500 F. The Model 6W-6H-4D, 6W-6H-8D and 6W-6H-12D Electric Industrial Batch Series is completely wired and tested. |
| |
-
Rated INDUSTRIAL Heavy Duty
-
Features Horizontal EVEN-FLO FORCED AIR Circulation as standard.
-
All electric models are MODULAR and EXPANDABLE
-
Expandable to 12 ft
|
|
- EXAMPLE: 6W-6H-8D
- Each 4 foot
section has 15KW heater.
- 30KW
total front and rear.
- Both
Front and rear section have horizontal airflow.
- Compare
with others!
- Maximum
Temperature: 500F
- Heaters: 30kW total (45kW and 60kW options)
- Recirculation
Air: 4800 CFM total
- 4800 CFM Total
|
|
|
| |
|
|
|
|
Model
6W-6H-8D ELECTRIC Industrial Batch Oven
Expandable up to 12 feet |
|
Model
6W-6H-8D ELECTRIC Industrial Batch Oven
Expandable up to 12 feet
|
|
| |
EXAMPLE: 6W-6H-8D ELECTRIC Batch Oven
Exterior
• Painted steel
Interior
• Aluminized Steel
• Steel
plate floor
Circulation
System
• 4,800 cfm total
• Direct drive motor (TEFC)
• Horizontal Airflow
Doors
• Slam latches
• Double doors to reduce door swing
Heating
System
•30kW total (45kW and 60kW options)
• Seamless Tubular elements
• Controlled by Solid state relay
|
|
Electrical
•230/3/60 or 230/1/60 (430/3/60 optional)
• High limit for safety
Control
Panel
• Main power switch
• Heat on/off switch
• Single setpoint temperature controller
• Process timer to shut heat off at end of cycle
Options
• Racks and carts
• Disconnect box
• Extension box
•
Pass through configuration (doors on both ends)
|
|
